易博仕冲孔铝单板采用优质铝合金3003为基材，可满足各种冲孔大小以及冲孔率的要求。能根据特殊要求冲出特定的图案，富有艺

术特色，可以提升建筑的层次感和现代感。

Eboss perforation aluminum cladding adopt high quality Aluminum Alloy 3003 as base material, can meet various 

requirements and the size of punching punching rate. According to the special requirements, special patterns can 

be rushed out, which are rich in artistic features, which can enhance the sense of hierarchy and modern sense of 

architecture.

易博仕采用德国进口全自动数控冲床, 可轻松实现冲孔铝单板各种复杂孔形的加工,满足客户对冲孔铝单板各种孔形、不规则孔径、

渐变式孔的需求，同时保证了冲孔加工的精度，最大程度地满足建筑设计的高标准,充分表达建筑设计的创新思路。

同时冲孔铝单板先进加工设备的高速工作，可以保证了冲孔铝单板生产周期，保证项目的进展。

冲孔铝单板广泛应用在外墙和室内装饰，让建筑增加了动的元素，冲孔铝单板其优越的环保性能及可塑性是其它建筑材料不可代替的，

因此深受建筑设计师的追捧。

铝单板幕墙采用优质高强度铝合金板材，其常用厚度为1.5，2.0，2.5，3.0，型号为3003，状态为H24.常规材料最大尺寸为1220mm

*2400mm。其构造主要由面板、加强筋和角码组成。角码可直接由面板折弯、冲压成型，也可在面板的折边上铆装角码成型。加强筋

与板面后的电焊螺钉连接，使之成为一个牢固的整体，极大增强了铝单板幕墙的强度与刚性，保证了长期使用中的平整度及抗震能力。

如果需要隔音保温，可在铝板内侧安装高效的隔音保温材料。

The aluminum cladding is made of high quality and high strength aluminum alloy sheet,common thickness used is 2,2.5,3,

type 3003,and status H24.The maximum size of the conventional material is 1200mm*2400mm.The structure is mainly composed 

of panels,stiffeners and bracket components.The bracket components can be directly formed from thr psnel through bending 

and pressing,and can also be formed through mounting the brackets on the hems of the panel.The stiffeners are connected 

to the welding screw on the back of the panel,to become a solid whole component,has greatly enhanced the strength and 

rigidity of the aluminum cladding,and ensured the smoothness and seismic capacity in the long-term use.If noise and heat 

insulation is needed,material with high effciency of noise and heat insulation can be installed in the inside of the aluminum sheet.